E150 2WD Suspension Rear Lift Kit 2 Inch
$264.98 – $271.98
Description
E150 2WD Suspension Rear Lift Kit 2 Inch
Product Description – Complete Rear Kit for 2″ of Lift.
NOTE: This is REAR KIT ONLY – Front & Rear Kit Available. Please see other listings.
This is a E150 2WD SUSPENSION REAR LIFT that is super heavy duty and designed for heavy duty diesel applications. This kit WILL also work on gasoline powered Econoline. Don’t settle for a kit that will not support the weight of your Econoline 150 Series. And beware of kits that “look” the same, but do not have the correct GVW rating.
IMPORTANT NOTE: Correct Year Selection is CRITICAL at checkout, because there are 9 different kit variations for the years ranging from 1992-2015. Be sure you get the correct kit by verifying and providing your vehicle Year Model, and Number of Wheel Lugs & Vehicle Identification Number Below:
Product Description – Complete Rear Kit for 2″ of Lift.
E150 2WD SUSPENSION REAR LIFT KIT 2 INCH – Ford Econoline Lift Kit! THIS IS A SUPER HEAVY DUTY KIT THAT IS DESIGNED FOR HEAVY DUTY DIESEL APPLICATIONS (WILL ALSO WORK ON GASOLINE POWERED ECONOLINE 150 SERIES). DON’T SETTLE FOR A KIT THAT WILL NOT SUPPORT THE WEIGHT OF YOUR VEHICLE. BEWARE OF KITS THAT “LOOK” THE SAME, BUT ARE NOT HAVE THE CORRECT GVW RATING.
Note: Although manufactured with the added weight of the diesel engines in mind, this kit will also work with gas engines*.
This kit is for E-150 SERIES ONLY.
IMPORTANT NOTE: Correct Year Selection is CRITICAL at checkout, because there are 9 different kit variations for the years ranging from 1992-2015. Be sure you get the correct kit by verifying and providing your vehicle year model. Also number of Wheel Lugs in REQUIRED before shipping.
*Not suitable for use on RV/Motorhome or Ambulance Packaged Equipped Applications
**Kit does NOT include springs (rear lift blocks & hardware only)
This Kit is engineered to work with Factory Springs & Shocks
E150 2WD SUSPENSION REAR LIFT KIT 2 INCH From FordPartsOne.com
INSTALLATION INSTRUCTIONS
Read entire instruction sheet thoroughly before starting. Wear safety glasses. Use safe vehicle lifting practices.
- Place wheel chocks in front and behind the front tires. Make sure vehicle will not move forward or back.
- Lift rear of vehicle by frame jacking points and support with jack stands on each side. Make sure vehicle is stable.
- Support rear differential with a floor jack. (See Figure 1)
- Loosen the 4 U-bolt nuts on the passenger side. Pull U-bolts up and out. Remove the axle mounting plate. Lower the floor jack down until there is 3 inches of space between the leaf spring and the rear axle. (See Figures 2 & 3)
- Place new lift block between the leaf spring and axle with the alignment dowel pins lined up. (See Figure 4)
- Jack the axle up and align spring dowel with lift block hole. Slide the new U-bolts over the leaf spring and though the mounting plate.
- Tighten U-bolt nuts evenly and to specification.
- Repeat Steps 4 through 7 on the driver’s side.
More Genuine Ford Parts also Available Directly to you, now at: FordSuperDutyParts.com
23 reviews for E150 2WD Suspension Rear Lift Kit 2 Inch
5 star | 78% | |
4 star | 21% | |
3 star | 0% | |
2 star | 0% | |
1 star | 0% |
You must be logged in to post a review.
Alex O. – Windham, CT (Verified Purchase) –
By far the best service and shipping, you will not be disappointed.
Adam J. – Dumfries, VA (Verified Purchase) –
No problems and pretty quick shipping
Samuel J. – Atlanta, GA (Verified Purchase) –
I’ll remove 1 star for the shipping delay although it was not their fault.
Dave J. – Bangor, ME (Verified Purchase) –
No problems and pretty quick shipping
Richard F. – Frankfort, KY (Verified Purchase) –
Hope to see you improve with shipping times. It took 4 days to get it.